WM Plastics Low Cure Ink


Fusion/Curing: 230° F - 325° F
Visa Mastercard American Express PayPal Diners Club Discover
Additional Info

WM Plastics Low Cure series is their most versatile series on the market, enabling printers to print on the most difficult substrates. Not only does this system hold up to the worst bleeders, but at the lower cure temps it could save a shop a ton of money in reduced energy costs.

Fusion/Curing: 230° F - 325° F


  • Direct Printing
  • White or colored garments
  • 100% cotton garments, cotton/polyester blends, acrylic, polyester, polypropylene spandex and stretchable substrates


  • Superb bleed resistance
  • No ghosting
  • Great stretchability
  • Easy to print viscosity
  • Great replacement for silicone inks
  • Flat, smooth finish for multi-color printing

Bleed resistance: Excellent

Opacity: High

Flashing: 700°F for 3-5 seconds, just enough for the surface to be tack free

Mesh: 61-230

Storage: 70°F-80°F . Due to ability to cure at lower temperatures, this is very important. Ink will become thicker over time but can be reduced to a printable viscosity.

Stencil: Any direct emulsion or capillary film

Wet on Wet Printing: Can be printed wet-on-wet to increase production

Modifications not recommended unless completely necessary. Any modifications will effect low cure properties.

View SDS

Additional information


Primrose, Lemon, Yellow Gold, Light Gold, Gold, Gray Underlay, Scarlet, Brite Red, Sky Blue, Kelly Green, Turquoise, Vegas Gold, PMS Cool Gray 4C, Light Navy, Royal Blue, Russell Purple, Cardinal, Maroon, Light Brown, Brite Orange, Brute White, Black


Gallon, 3.5 Gallon, 5 Gallon

© 2024 Wild Side North. All Rights Reserved.